The value of your home will increase over time as a result of the installation of a metal tile roof. It is not as cost-effective as shingle roofing in the short and long term, but the advantages it provides in both the short and long term may be sufficient to make it a worthwhile investment in the long run.

Heat and humidity are common during the summer months in Florida, and it is not uncommon for cooling costs to account for more than half of your total electricity bill during the hot and humid months of the year. Metal tiles are coated with a reflective coating in order to reflect solar radiant heat and keep the interior of the building cool during the summer. Because less energy is entering your home, you will use less energy to cool it, resulting in a significant reduction in your electricity bills immediately following the installation of the system, as previously explained.

Renewal of a roof requires significant financial and material outlay, not only in terms of labor but also with regard to the materials used to construct the roof structure itself. When asphalt shingle roofing products are improperly disposed of, the Environmental Protection Agency estimates that approximately 20 billion pounds of trash is generated each year as a result. Asphalt can be recycled, there is no doubt about that. Finding facilities that will do so at a reasonable cost, on the other hand, continues to be a difficult task to complete. Ceramic tiles are recyclable, but finding a facility that will accept them can be more difficult than finding a facility that will accept asphalt or concrete shingles. This is true even though ceramic tiles can be recycled.

Sheet metal tile panels, which can be made from recycled materials in some cases, are covered by warranties that can last for up to 50 years and can be installed in any environment, including the outdoors. This means that if you only invest in one metal tile roof, you can go through two or more full asphalt tile roofs in the same amount of time it would take to install a single metal tile roof. If you only invest in one metal tile roof, you can go through two or more full asphalt tile roofs in the same amount of time it would take to install a single metal tile roof. The metal is also completely recyclable, which is a welcome addition to the overall package. Because it is both profitable and easily recycled, the process of identifying facilities that will accept them is made simpler as a result of the fact that it is a more straightforward endeavor.

Because of its durability, metal tile roofing is more expensive up front, but in the long run, it is a worthwhile long-term investment in the value of your home. It has already been stated that when properly maintained, a metal tile roof with a 50-year warranty has the potential to outlast two shingle roofing systems over the course of the roof's service life span. Also as an added benefit, it will increase the resale value of your home or business establishment. According to some estimates, a fire can reduce the value of a home by as much as 6%, depending on the circumstances. It basically means that if you sell your home quickly, you could recover as much as 85% of your initial investment in the property. A free full inspection of your home is recommended once a year or after any significant weather event. Metal tile roofing, on the other hand, requires very little maintenance over the course of its lifespan.

The process of repairing your metal spanish roof tiles is much simpler than you might have imagined, despite the fact that it appears to be a complicated undertaking. Debris or hail damage to smaller areas of the body is so simple to repair that you can buy a kit and complete the job in the comfort of your own home. No need to be concerned because your product is covered by a 50-year warranty, and Sunflo will be happy to handle any repairs or replacements that may be necessary.

Tropical storms in Florida are a major source of concern for residents all across the state of Florida. The superior storm protection provided by metal tile roofs over other types of roofs, such as shingles or clay roofs, is a significant advantage. The use of clay or asphalt roofs, as well as the use of metal tile roofs, reduces the likelihood of being struck by lightning. An electrical spark from an electrical line striking the roof will not cause it to catch fire, and the roof will remain completely intact due to the virtually indestructible nature of the metal tiles used in the construction of the roofing system.

Even during hurricane season, which occurs frequently in the United States, a metal tile roof will keep you and your family safe from some of the most powerful winds that can blow through your home and cause damage to your belongings. Most products are built to withstand winds of at least 140 miles per hour! Depending on how well the game is supported, some versions of the game have been reported to be capable of recording wind speeds up to 180mph.

We recognize that you are making a significant financial commitment by making this purchase, and we appreciate your considerationPlease do not hesitate to get in touch with us if you have any questions or concernsWe will be delighted to be of assistance to youFor more information or to schedule a free inspection, please contact usWe will be happy to come out and inspect your current roofing setup as well as provide you with quotes for a metal tile roof in order to assist you in making an informed decision about your roofing needs and optionsBuilding metal roofs has been around for hundreds of years, with origins dating back to the 3rd century BCin Sri Lanka and EgyptMetal roofing has been used as a roofing material for hundreds of yearsIt was not until the early nineteenth century that metal roofing, which is typically made of lead or copper, gained widespread popularity in EuropeIt was not until the early nineteenth century that it made its way to the United States, where it has stayed ever sinceA growing number of acceptable metal tile roof materials have been added to the list as technology has advanced<a href="https://roofmetaltilecom/spanish-stone-coated-metal-roof-tiles-2">Metal tile roof materials such as iron, steel, aluminum, and zinc have all been included in the list of acceptable <a href="https://roofmetaltilecom/spanish-stone-coated-metal-roof-tiles-2">metal spanish roof tiles materialsThere are many different types of metal spanish roof tiles styles in use across the country, and metal roofing is one of the most durable and long-lasting materials available for use on residential and commercial buildings, as well as architectural and structural structures, and there are many different types of metal roofing materials available for use on residential and commercial buildingsArchitectural and structural structures can benefit from metal roofing, which is also one of the most cost-effective materials available for use on these structures


Metal roofs can last for decades, depending on the material used, and the majority of Galvalume and aluminum roof products, according to the majority of manufacturers, have a guaranteed life span of 40 years or more. Especially if the system has been installed correctly and has been properly maintained over the course of time, this is the case.

Being significantly lighter than most other roofing materials and five times lighter than a clay Spanish tile roof, it is an excellent choice for areas that experience high winds. A 24-gauge Galvalume (steel) roof weighs between 1 and 1.5 pounds per square foot when measured in pounds per square foot, depending on the thickness of the material. Instead of using steel or concrete, an aluminum roof with a thickness of.032 inches weighs less than.5 pounds per square foot when constructed entirely of aluminum or aluminum alloy, as opposed to steel and concrete.

A significant difference exists between how well metal performs in terms of strength and durability, and how well other materials perform. When compared to other materials such as wood, clay, plastic, or glass, metal is the most durable and least prone to puncturing, breaking apart, and degrading over time, according to the American Society for Testing and Materials.